UHF一体化读写器

UHF integrated reader

    1)本产品具有多协议兼容：支持ISO18000-6C（EPC C1G2）、ISO18000-6B多协议电子标签This product has multi-protocol compatibility: supports ISO18000-6C(EPC C1G2 ) and ISO18000-6B multi-protocol electronic tags.

    2)读取速率快：结合专有的高效电子标签碰撞处理算法，在保持高识读率的同时，实现对电子标签的快速读写处理fast reading speed: combined with proprietary and efficient collision processing algorithm for electronic tags, fast reading and writing processing for electronic tags can be realized while maintaining high reading rate.

    3)工业等级防水：该产品采用防水型外观设计，满足各种环境下使用

industrial grade waterproof: this product adopts waterproof exterior design to meet the needs of various environments.

    4)二次开发：提供DLL以及Demo程序

secondary development: providing DLL and Demo programs

WinCE系统高性能四通道UHF读写器

WinCE System High Performance Quad - Channel UHF Reader

内置WinCE 6.0系统,可以离线存储数据，支持WiFi、GPRS、4G全网通等无线传输模块（选配），并且支持PSAM卡加密功能和远程升级。在不带PSAM功能时，模块与接口板可直连。本品为全密封设计，防护等级可叨叨IP67，适应各种恶劣环境并正常工作。uilt - in WinCE 6.0 system can store data offline, support wireless transmission modules ( optional ) such as WiFi, GPRS, 4G full netcom, and support PSAM card encryption function and remote upgrade. When there is no PSAM function, the module and the interface board can be directly connected. This product is of fully sealed design, with a protection rating of IP67. It is suitable for various harsh environments and works normally.

D2184BA是一款高性能的 UHF 频段 ISO18000-6C（EPC C1G2）/ ISO18000-6B电子标签读写器，采用Impinj公司的最新R2000芯片方案，结合专有的高效电子标签碰撞处理算法，在保持高识读率的同时，实现对电子标签的快速读写处理，提供4路TNC天线接口，支持4路独立天线，提供网口、RS232、RS485接口数据传输。D2184BA is a high-performance UHF band iso 18000 - 6c ( epc1g2 ) / iso 18000 - 6b electronic tag reader - writer. it adopts Impinj's latest R2000 chip scheme and combines with proprietary high-efficiency electronic tag collision processing algorithm to realize fast read-write processing of electronic tags while maintaining high reading rate. it provides 4 TNC antenna interfaces, supports 4 independent antennas and provides data transmission of network ports, RS232 and RS485 interfaces.

支持Alien H3 、Impinj M系列、NXP G2x* & G2i*系列 、ID Cool Log等标签芯片，以及smartrac的温度、湿度、距离、压力传感标签（可选），标签兼容性行业唯一性。 支持多协议包括EPC Gen2 &ISO 18000-6C、EPC ISO 18000-6B、IP-X多种RFID协议标准。 支持FCC902-928Mhz或其他指定规范（ETSI(EU) 865.6-867.6MHz或MIC(Korea)910-914MHz或SRRC-MII(P.R.China) 920-925MHzAlien H3, Impinj M series, NXP G2x* & G2i* series, ID Cool Log and other tag chips are supported, as well as temperature, humidity, distance and pressure sensing tags ( optional ) of smartrac, and tag compatibility is unique in the industry. Support for multi-protocol includes EPC Gen2 &ISO 18000-6C, EPC ISO 18000-6B, IP-X RFID protocol standards. Support FCC902-928Mhz or other specified specifications ( ETSI(EU) 865.6-867.6MHz or MIC(Korea)910-914MHz or SRRC-MII(P.R.China) 920-925MHz )

多通道UHF超高频读写器Multichannel UHF  Reader

基于Impinj R2000读写引擎设计；

Design of read-write engine based on Impinj R2000:

 充分支持符合EPC CLASS1 G2、ISO18000-6B标准的电子标签；

Fully support electronic tags conforming to EPC CLASS1 G2 and ISO18000-6B standards;

 工作频率Operating frequency :860~868MHz/902~928MHz(可以按不同国家或地区要求调整can be adjusted according to the requirements of different countries or regions)

 以广谱跳频(FHSS)或定频发射方式工作；

 输出功率达至30dBm（可调）；

Output power up to 30dBm ( adjustable );

 12个外接SMA天线接口，支持天线自动微调谐和天线失效检测；

12 external SMA antenna interfaces to support automatic fine tuning and antenna failure detection; 

 支持主动、应答、触发、实时询查等多种工作模式；

Support active, response, trigger, real-time inquiry and other working modes;

 支持内部800张标签（最大EPC长度496bits）缓存；

Support internal 800 tags ( maximum EPC length 496bits ) cache;

 支持EPC和TID两种防冲突模式；

Support EPC and TID anti-conflict modes;

 低功耗设计，单＋9V电源供电；

Low power consumption design, single + 9V power supply;

 支持RS232、RJ45（TCPIP）等多种通讯接口，可选配POE网络供电；

Support RS232, RJ45(TCPIP ) and other communication interfaces, optional POE network power supply;

 高可靠设计，满足严苛工作环境要求；

Highly reliable design to meet demanding working environment requirements;

 支持Firmware在线升级。

Firmware online upgrade is supported.

单USB口超高频RFID读写器

Single USB port UHF RFID reader

    1) 充分支持符合 ISO18000-6C（EPC C1G2）、ISO18000-6B协议的各种电子标签 Fully support various electronic tags conforming to ISO18000-6C(EPC C1G2 ) and ISO18000-6B protocols

    2) 先进的标签防碰撞处理算法，高识读率 

Advanced label anti-collision processing algorithm with high recognition rate

    3) 工作频率operating frequency: 902～928MHz(可以按不同国家或地区要求调整can be adjusted according to the requirements of different countries or regions) 

    4) 以广谱跳频(FHSS)方式工作，调频点多达20个以上

Working in a broad spectrum frequency hopping ( FHSS ) mode with more than 20 frequency modulation points

    5) 输出功率 Output power： 0～30dBm可调(adjustable)

    6) 支持应答（交互）工作模式和主动工作模式 

Support response ( interactive ) working mode and active working mode

    7) 主动工作模式下输出格式和参数可配置 

Output format and parameters can be configured under active working mode

    8) 支持 TCP/IP、RS232、韦根接口

Support TCP/IP, RS232 and Wigan interfaces

    9) 提供动态连接库（DLL），支持二次开发

 Provide Dynamic Link Library ( DLL ) to support secondary development